0.375 Inch OD
0.075 Inch Tube Wall
0.225 Inch ID
Rating: 1500 PSI
Min Burst Pressure: 2800PSI at 75 Degrees F

High-Pressure Nylon Tubing
0.375 Inch OD
0.075 Inch Tube Wall
0.225 Inch ID
Black Color
Rating: 1500 PSI
Min Burst Pressure: 2800PSI at 75 Degrees F

Brass Back Ferrule

0.020 Inch - Low Pressure
Nickel-Plated - With a stainless-steel fixed impeller pin and orifice
10/24 Thread Size
Recommended Pressure: For low pressure misting systems  (40 -100 PSI)
Full cone pattern spray 60-70 degrees

0.015 Inch - Low Pressure
Nickel-Plated - With a stainless-steel fixed impeller pin and orifice
12/24 Thread Size
Recommended Pressure: For low pressure misting systems (40 -100 PSI)
Full cone pattern spray 60-70 degrees

For the high-pressure misting system with 1/4" Push-lock fittings
Reusable
High Pressure Rated

10/24 Thread

Brass Front Ferrule

Brass Hex Nipple 1/4" NPT and 3/8" NPT

0.012 Inch - Mid Pressure
Nickel-Plated - With a stainless-steel fixed impeller pin and orifice
10/24 Thread Size
Recommended Pressure: For mid pressure misting systems (100 -300 PSI)
Full cone pattern spray 60-70 degrees

9/16-24NEF x 1/4 Inch FPT

1/8 Inch M X 1/8 Inch F

9/16-24NEF x 1/8 Inch FPT

0.012 Inch - Mid Pressure
Nickel-Plated - With a stainless-steel fixed impeller pin and orifice
12/24 Thread Size
Recommended Pressure: For mid pressure misting systems (100 -300 PSI)
Full cone pattern spray 60-70 degrees
0.014 GPM (Gallons Per Minute) at 200 PSI

Emits the highest quality of mist for outdoor cooling or indoor-workspace cooling.
Stainless Steel Body is head and shoulders above other Fittings on the market in strength and good looks.
Stainless-Steel Spring resists corrosion including rust.
Can be used with any of our 10/24-inch Misting Nozzles.
Creates On/Off no-drip effect so there is no residual moister on surfaces below the Misting System.
Suitable for many applications and Mist Nozzles.
Purchase Mist Nozzle separately; Not Included

Stainless Steel High performance, corrosion proof
Compression fittings
Made from SS316
For misting systems and humidification systems. 

3/8in High-Pressure End Plug for Push Lock Fittings
Ends the mist line
Nickle Plated Brass
1500PSI Rated

2-Inch Length Extension
¼-Inch Stem to 10/24-inch Nozzle threading
Nickel-Plated Brass
Rated up to 1500psi
For use to extend mist application area around your backyard, around a pool house, or greenhouse, or indoor-workspaces like garages, warehouses, or manufacturing areas, and more
Mist Nozzle NOT included

Anti-drip (no-drip) Feature
Stainless Steel Fixed Pin Orifice
Brass Body - Nickel Plated
Instant On, Instant OFF mist effect
60-70 Degree Cone Pattern Spray
0.018 GPM (Gallons Per Minute)