For Garden Hose Brass Fittings
3/4" GHT
Compatible with standard 3/4" garden hose fittings

1/4 Inch OD
.170 Inch ID
0.040 Inch Wall Thickness
UV Treated
Use for Misting Systems and Mosquito Misting Systems
Rated for up to 300 PSI
Does not crack or leak
Minimum burst pressure - 300 PSI at 75 Degree F

1/4 Inch OD
.170 Inch ID
0.040 Inch Wall Thickness
UV Treated
Use for Misting Systems and Mosquito Misting Systems
Rated for up to 300 PSI
Does not crack or leak
Minimum burst pressure - 300 PSI at 75 Degree F

1/2" M x 3/8" F Adapter
Nickel Plated
1500 PSI Rated

Simply mount the outdoor rated fan with the stainless steel fan misting ring, with provided hardware, and hook it up to any faucet or end of a garden hose to activate the mist. Each misting fan system comes with high-quality brass and stainless steel misting nozzles with the nickel-plated finish, 20ft of the feed line, on/off valve, 5-micron filter, and garden hose connector.

30 Inch Outdoor Rated Oscillating Fan
6 Nozzle Stainless Steel Misting Ring
1 - On/ Off Shut off valve
1- Calcium Inhibitor Filter
Feed Line
Nozzles
30 Inch Outdoor Rated Oscillating Fan

High-Pressure Nylon Tubing
1/4 Inch OD
0.050 Inch Tube Wall
0.15 Inch ID
Dark Brown Color
Rating: 1500 PSI

High-Pressure Nylon Tubing

1/4 Inch OD
0.050 Inch Tube Wall
0.15 Inch ID
White Color
Rating: 1500 PSI

1/4 Inch OD
0.050 Inch Tube Wall
0.15 Inch ID
Black Color
Rating: 1500 PSI

Mid Pressure - 30 PSI

High Pressure - 70PSI

Rust-Resistant Stainless-Steel Spring with Rubber Burb (Stopper) is built to last
Prevents dripping and creates an instant On/Off mist effect
Saves water by preventing dripping
Reduces maintenance of your misting systems at a very low cost
Flexible; works with low, medium, or high-pressure Fittings for Misting Systems
Stopper available in 15psi Low-Pressure, 40 Psi Mid Pressure, or 70psi High-Pressure Mist System.

1x 12/24 Thread (for Ruby Nozzles only)

1x 10/24 Thread (for Ruby Nozzles only)

Specifications
0.015 Inch - Low Pressure
Nickel-Plated - With a stainless-steel fixed impeller pin and orifice
10/24 Thread Size
Recommended Pressure: For low pressure misting systems (40 -100 PSI)
Full cone pattern spray 60-70 degrees

10/24 Thread Plug
To block unwanted mist in specific areas.
Remove your existing misting nozzle and replace it with this Nozzle Plug

12/24 Thread Plug
To block unwanted mist in specific areas.
Remove your existing misting nozzle and replace it with this Nozzle Plug

Min Burst Pressure: 300PSI at 75 Degrees F
3/8 Inch OD
0.250 Inch ID
0.062 Inch Wall Thickness
Beige Color
UV Resistant
Flexible
Does not crack or leak
Beige Color
Can be used for low or mid pressure misting systems and Mosquito/insect control systems

1x 1/8 Thread (for Ruby Nozzles only)

0.375 Inch OD
0.075 Inch Tube Wall
0.225 Inch ID
Rating: 1500 PSI
Min Burst Pressure: 2800PSI at 75 Degrees F