MC13090 1500 PSI Standard Misting Package - Flexible Tubing - Free Smartphone Controller
High-Pressure Misting System Application:
Backyard Misting for Residential Misting System
Patio Misting System
Gazebos Cooling System
Porches Misting System
Outdoor Cooling System with best Misting Pump
High Pressure 1500 PSI Misting Package
1500 PSI Misting System with 1/4in High-Pressure Nylon Tubing
6ft Garden Hose Adaptor Feed Line 3/8in OD
Stainless Steel Misting Nozzles
Nickel-Plated High-Pressure Fittings
WiFi - Enabled with Smartphone Controller (Optional)
Base Kit Components:
1x 1500 PSI Standard Misting Pump
10x Stainless Steel Misting Nozzles - 0.006" Orifice 10/24 thread
10x Misting Tees
50ft High-Pressure Tubing Roll
High-Pressure Misting System Accessory Kit
1500psi oil-less
0.15 GPM
-
Max Pressure (psi)¹ :
1500
-
Maximum number of nozzles: 20
-
Flow rate (gpm) : 0.15
- Filtration : 5 Micron
- Voltage : 110 V AC
- Full load Amps : 1.38
- RPM : 1600
- HP : 0.25
- Pump Inlet² : 3/8" or 1/4" pushlock
- Pump Outlet : 3/8" or 1/4" pushlock
- Solenoid : Yes
- Pressure switch/ No water cut-off : Yes
- Drive : Direct
- Thermal safety Switch³ : Yes
- By-pass : Yes
- Motor type : Enclosed
- Noise level : 60-70 DB
- Oil Less : Yes
- Recommended operating Temp. : 33⁰- 140⁰ F
- Dimensions (inch) : 15.5 x 14 x 10
-
Weight (lbs.) :
17
1500 PSI Pump
- Maximum Outlet Pressure: 1500 PSI
- Maximum Pump Speed (0.50/ 1 / 2 GPM): 1750/ 1750/ 1750 RPM
- Maximum Inlet Pressure: 125 PSI
- Minimum Inlet Pressure: 40 PSI (Based on setting on Pressure switch) or Flooded if Pressure switch is bypassed
- Maximum Flow: 0.50, 1 & 2 GPM (Refer to manufacturing label on pump)
- Voltage: 110V/ 220V AC (Refer manufacturing label on the pump)
- Oil Type: AW-100
- Oil Capacity: 11.8oz
- Maximum Fluid Temperature: For Room Temperature / Cold Water applications only. (Please refer page 19 for full specs of the pump)
1500psi oil-less
0.3 GPM
-
Max Pressure (psi)¹ :
1500
-
Maximum number of nozzles :
40
-
Flow rate (gpm) :
0.3
- Filtration : 5 Micron
- Voltage : 110V AC
- Full load Amps : 2.15
- RPM : 1820
- HP : 0.25
- Pump Inlet² : 3/8" or 1/4" pushlock
- Pump Outlet : 3/8" or 1/4" pushlock
- Solenoid : Yes
- Pressure switch/ No water cut-off : Yes
- Drive : Direct
- Thermal safety Switch³ : Yes
- By-pass : Yes
- Motor type : Enclosed
- Noise level : 60-70 DB
- Oil Less : Yes
- Recommended operating Temp. : 33⁰- 140⁰ F
- Dimensions (inch) : 15.5 x 14 x 10
-
Weight (lbs.) :
17
1500psi oil-based pumps - 2GPM
Maximum number of nozzles : 160
-
Flow rate (gpm) : 2
-
Filtration :
5 Micron
-
Voltage :
110V AC
- Full load Amps : 16.5
- RPM : 1745
- HP : 2
- Pump Inlet² : 3/8" or 1/4" pushlock
- Pump Outlet : 3/8" or 1/4" pushlock
- Solenoid : Yes
- Pressure switch/ No water cut-off : Yes
- Drive : Direct
- Thermal safety Switch³ : No
- By-pass : Yes
- Motor type : TEFC
- Noise level : 50-60 DB
- Oil Less : No
- Recommended operating Temp. : 33⁰- 160⁰ F
- Dimensions (inch) : 26.5 x 15.5 x 13
-
Weight (lbs.) :
76
1500psi oil-based pumps - 1GPM
Maximum number of nozzles : 80
- Flow rate (gpm) : 1
- Filtration : 5 Micron
- Voltage : 110V AC
- Full load Amps : 9.2
- RPM : 1745
- HP : 1
- Pump Inlet² : 3/8" or 1/4" pushlock
- Pump Outlet : 3/8" or 1/4" pushlock
- Solenoid : Yes
- Pressure switch/ No water cut-off : Yes
- Drive : Direct
- Thermal safety Switch³ : No
- By-pass : Yes
- Motor type : TEFC
- Noise level : 50-60 DB
- Oil Less : No
- Recommended operating Temp. : 33⁰- 160⁰ F
- Dimensions (inch) : 26.5 x 15.5 x 13
- Weight (lbs.) : 61
1500psi oil-based pumps - 0.5 GPM
Maximum number of nozzles : 45
- Flow rate (gpm) : 1
- Filtration : 5 Micron
- Voltage : 110V AC
- Full load Amps : 5.8
- RPM :
1750
- HP : 0.5
- Pump Inlet² : 3/8" or 1/4" pushlock
- Pump Outlet : 3/8" or 1/4" pushlock
- Solenoid : Yes
- Pressure switch/ No water cut-off : Yes
- Drive : Direct
- Thermal safety Switch³ : No
- By-pass : Yes
- Motor type : TEFC
- Noise level : 50-60 DB
- Oil Less : No
- Recommended operating Temp. : 33⁰- 160⁰ F
- Dimensions (inch) : 26.5 x 15.5 x 13
- Weight (lbs.) : 52
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.