MC13040 1500 PSI Premium Misting System - Flexible Tubing - Free Smartphone Controller (copy)
Combines ease of installation with unparalleled performance in addition to decorative looks to compliment your outdoor living space or commercial seating areas. The 1500 PSI Flexible, High Pressure Misting System is both, effective at beating the unbearable summer heat and efficient for cooling using minimal power. With its specially designed ultrafine misting nozzles, you can reduce outdoor temperatures by up to 30 degrees. It is perfect for residential and a variety of commercial misting applications. The tubing is available in multiple colors as well.
1500psi oil-based pumps - 0.5 GPM
Maximum number of nozzles : 45
- Flow rate (gpm) : 1
- Filtration : 5 Micron
- Voltage : 110V AC
- Full load Amps : 5.8
- RPM :
1750
- HP : 0.5
- Pump Inlet² : 3/8" or 1/4" pushlock
- Pump Outlet : 3/8" or 1/4" pushlock
- Solenoid : Yes
- Pressure switch/ No water cut-off : Yes
- Drive : Direct
- Thermal safety Switch³ : No
- By-pass : Yes
- Motor type : TEFC
- Noise level : 50-60 DB
- Oil Less : No
- Recommended operating Temp. : 33⁰- 160⁰ F
- Dimensions (inch) : 26.5 x 15.5 x 13
- Weight (lbs.) : 52
1500psi oil-based pumps - 2GPM
Maximum number of nozzles : 160
-
Flow rate (gpm) : 2
-
Filtration :
5 Micron
-
Voltage :
110V AC
- Full load Amps : 16.5
- RPM : 1745
- HP : 2
- Pump Inlet² : 3/8" or 1/4" pushlock
- Pump Outlet : 3/8" or 1/4" pushlock
- Solenoid : Yes
- Pressure switch/ No water cut-off : Yes
- Drive : Direct
- Thermal safety Switch³ : No
- By-pass : Yes
- Motor type : TEFC
- Noise level : 50-60 DB
- Oil Less : No
- Recommended operating Temp. : 33⁰- 160⁰ F
- Dimensions (inch) : 26.5 x 15.5 x 13
-
Weight (lbs.) :
76
1500psi oil-based pumps - 1GPM
Maximum number of nozzles : 80
- Flow rate (gpm) : 1
- Filtration : 5 Micron
- Voltage : 110V AC
- Full load Amps : 9.2
- RPM : 1745
- HP : 1
- Pump Inlet² : 3/8" or 1/4" pushlock
- Pump Outlet : 3/8" or 1/4" pushlock
- Solenoid : Yes
- Pressure switch/ No water cut-off : Yes
- Drive : Direct
- Thermal safety Switch³ : No
- By-pass : Yes
- Motor type : TEFC
- Noise level : 50-60 DB
- Oil Less : No
- Recommended operating Temp. : 33⁰- 160⁰ F
- Dimensions (inch) : 26.5 x 15.5 x 13
- Weight (lbs.) : 61
200 PSI Pumps
- Maximum Inlet Pressure: 100 PSI
- Minimum Inlet Pressure: Self-priming (Capable of lifting water from 6 feet below)
- Maximum Outlet Pressure: 200 PSI (depends on line length and numbers of nozzles)
- Maximum Flow: 0.5 GPM
- Full load amps. (110V ̴̴ 220V AC/ 12V DC): Refer manufacturing label on the pump
- Voltage: 110V-220V AC/ 12V DC
- Noise Level: approx. 35db
- Maximum Fluid Temperature: For Room Temperature / Cold Water applications only
250 PSI Pumps
- Maximum Inlet Pressure: 100 PSI
- Minimum Inlet Pressure: Self-priming
- Maximum Outlet Pressure: 250 PSI (depends on line length and numbers of nozzles)
- Maximum Flow: 0.9 GPM
- Full load Amps. 110V AC: 0.7 Amps12V DC: 4.0 Amps
- Voltage: 110V-220V AC/ 12V DC
- Noise Level: 40db
- Maximum Fluid Temperature: For Room Temperature / Cold Water applications only
1000 PSI Pumps
- Maximum Pump Speed (0.15/ 0.30 GPM): 1600/ 1700 RPM
- Maximum Inlet Pressure: 100 PSI
- Minimum Inlet Pressure: (Based on setting on Pressure switch) or Flooded
- Maximum Outlet Pressure: 1000 PSI
- Maximum Flow: 0.15 GPM, 0.30 GPM (Refer to manufacturing label on pump)
- Full load Amps: (0.15/ 0.30 GPM): 1.38/ 2.00 Amps
- Voltage: 110V/ 220V AC/ 12V DC (Refer manufacturing label on the pump)
- Noise Level: 75 DB
- Maximum Fluid Temperature: For Room Temperature / Cold Water applications only
1500 PSI Pump
- Maximum Outlet Pressure: 1500 PSI
- Maximum Pump Speed (0.50/ 1 / 2 GPM): 1750/ 1750/ 1750 RPM
- Maximum Inlet Pressure: 125 PSI
- Minimum Inlet Pressure: 40 PSI (Based on setting on Pressure switch) or Flooded if Pressure switch is bypassed
- Maximum Flow: 0.50, 1 & 2 GPM (Refer to manufacturing label on pump)
- Voltage: 110V/ 220V AC (Refer manufacturing label on the pump)
- Oil Type: AW-100
- Oil Capacity: 11.8oz
- Maximum Fluid Temperature: For Room Temperature / Cold Water applications only. (Please refer page 19 for full specs of the pump)
Low Pressure Misting Systems
Up to 25 Nozzles - 50 Ft Misting
- DIY Misting System
- Up to 50 psi
- Larger droplets
-
Cooling Effectiveness :
Moderate
- Attach to Garden Hose
- Fine Mist
- Single line
- Cost:Lower Cost
- Energy Efficiency: No energy use
-
Noise Level:Quieter
- Can leave areas wet
- 40 - 100 PSI
- Beige Tubing
- Cannot be expanded
Mid Pressure Misting Systems
Up to 40 Nozzles - 80 Ft Misting
- DIY Misting System
- 50 to 250 psi
- Medium droplets
- Cooling Effectiveness :
Good
- Pump attach to garden hose
- Finer Mist
- Single line
- Cost:Moderately priced
- Energy Efficiency: Higher than low pressure
-
Noise Level:Moderate Noise
- No wet areas
- Up to 250 PSI
- Black/ Beige/Stainless Steel Tubing
- Easily expanded
High Pressure Misting Systems
Up to 260 Nozzles - 520 Ft Misting
- DIY Misting System
- 250 to 1500 psi or higher
- Fine, almost fog-like droplets
- Cooling Effectiveness :
Excellent
- Pump attach to garden hose
- Fog Spray Mist
- Multiple lines
- Cost:Expensive
- Energy Efficiency: High energy use - effective cooling
-
Noise Level:
Can be noisy due to high pressure pumps
- Evaportaive cooling
- Up to 1500 PSI
- Black/ Beige/Stainless Steel Tubing
- Easily expanded
Nozzle Flow Rate - GPM
High-Quality 1/4 Inch PE Tubing for Efficient and Durable Misting Systems
- Durable PE Material: Made from high-quality polyethylene for long-lasting performance.
- 1/4 Inch Diameter: Ideal for efficient water distribution in misting systems.
- UV Resistant: Designed to withstand sun exposure without degrading.
- Flexible and Easy to Install: Allows for easy routing and installation in various configurations.
- Cost-Effective Solution: Offers excellent value for extensive misting system installations.
- Leak-Proof Design: Ensures reliable and consistent misting performance without leaks.
- Versatile Applications: Perfect for residential, commercial, and industrial misting systems.
- Compatibility: Works seamlessly with standard misting nozzles and fittings
High-Pressure 1/4 Inch OD HP Nylon Tubing - Available in Multiple Colors for Versatile Misting Systems
- High-Pressure Rated: Withstands pressures up to 1500 PSI, ideal for high-performance misting systems.
- Durable Nylon Material: Constructed from high-quality nylon for enhanced durability and longevity.
- 1/4 Inch Outer Diameter: Ensures efficient water flow and misting.
- UV Resistant: Designed to resist sun damage, extending the tubing's lifespan.
- Flexible and Easy to Install: Easily routed and installed in various configurations.
- Leak-Proof Design: Provides reliable and consistent misting without leaks.
- Versatile Applications: Suitable for residential, commercial, and industrial misting systems.
- Available in Multiple Colors: Options include black, brown, and white to suit various setups.
- Temperature Resistant: Maintains performance in a wide range of temperatures.
- Compatible: Works well with standard misting nozzles and fittings.
1/4 Inch Grooved Stainless Steel Tubing for Push Lock - Ideal for Misting Systems and Mid to High-Pressure Applications
- Durable Material: Constructed from high-quality stainless steel for enhanced durability and corrosion resistance.
- Easy Installation: Engineered for push-lock fittings, ensuring quick and secure connections.
- Grooved Design: Features grooved tubing for improved grip and stability in push-lock systems.
- Specialized Use: Perfect for misting systems, providing efficient and reliable performance.
- High Pressure Tolerance: Suitable for both mid-pressure and high-pressure applications, ensuring reliable operation.
- Precision Manufacturing: Maintains consistent internal diameter for optimal flow and efficiency.
- Maintenance-Free: Requires minimal upkeep due to its robust construction and resistance to wear and tear.
3/8 Inch Stainless Steel Mist Line with 10-24 Thread - 8 ft Length, Ideal for Industrial Applications
Specifications
- Rated to 3000 PSI
- Material: 3/8" Stainless Steel Mist Line
- Thread: 10/24 Thread Nozzle Riser every 24"
- Length: 8 ft Section
- Spacing: 2 ft Spacing for Misting Nozzle Slot
- Connections: Compression fittings are required to connect sections
Features
- Lifetime Warranty
- Reduces Pressure Loss: Less friction for improved performance
- Leak Prevention: Fewer splits reduce the risk of leaks
- Supports Multiple Nozzles: Supports 4 nozzles per section (nozzles sold separately)
- Customizable: Custom length and spacings are available on request
Applications
- High-Pressure Misting Systems
- Residential Patio Misting
- Restaurant Misting
- Industrial Misting
- Warehouse Cooling
- Greenhouse Cooling
Specifications
| MC13040 Premium System Length | Small Patio (50ft - 10 Nozzles) - 0.50 GPM Pump or Medium Patio (150ft - 50 Nozzles) - 1 GPM Pump or Large Patio (250ft - 90 Nozzles) - 2 GPM Pump |
| Smart Phone Controller | Smart Phone Controller: No or Smart Phone Controller: Yes |
| Tubing Color | Beige or Black or Dark Brown or White |
| Tags | |
|---|---|
| Tags | |
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.