Mistcooling 1500 PSI Premium (Oil Based) Misting Pumps
1500psi oil-based pumps - 2GPM
Maximum number of nozzles : 160
-
Flow rate (gpm) : 2
-
Filtration :
5 Micron
-
Voltage :
110V AC
- Full load Amps : 16.5
- RPM : 1745
- HP : 2
- Pump Inlet² : 3/8" or 1/4" pushlock
- Pump Outlet : 3/8" or 1/4" pushlock
- Solenoid : Yes
- Pressure switch/ No water cut-off : Yes
- Drive : Direct
- Thermal safety Switch³ : No
- By-pass : Yes
- Motor type : TEFC
- Noise level : 50-60 DB
- Oil Less : No
- Recommended operating Temp. : 33⁰- 160⁰ F
- Dimensions (inch) : 26.5 x 15.5 x 13
-
Weight (lbs.) :
76
1500psi oil-based pumps - 1GPM
Maximum number of nozzles : 80
- Flow rate (gpm) : 1
- Filtration : 5 Micron
- Voltage : 110V AC
- Full load Amps : 9.2
- RPM : 1745
- HP : 1
- Pump Inlet² : 3/8" or 1/4" pushlock
- Pump Outlet : 3/8" or 1/4" pushlock
- Solenoid : Yes
- Pressure switch/ No water cut-off : Yes
- Drive : Direct
- Thermal safety Switch³ : No
- By-pass : Yes
- Motor type : TEFC
- Noise level : 50-60 DB
- Oil Less : No
- Recommended operating Temp. : 33⁰- 160⁰ F
- Dimensions (inch) : 26.5 x 15.5 x 13
- Weight (lbs.) : 61
1500psi oil-based pumps - 0.5 GPM
Maximum number of nozzles : 45
- Flow rate (gpm) : 1
- Filtration : 5 Micron
- Voltage : 110V AC
- Full load Amps : 5.8
- RPM :
1750
- HP : 0.5
- Pump Inlet² : 3/8" or 1/4" pushlock
- Pump Outlet : 3/8" or 1/4" pushlock
- Solenoid : Yes
- Pressure switch/ No water cut-off : Yes
- Drive : Direct
- Thermal safety Switch³ : No
- By-pass : Yes
- Motor type : TEFC
- Noise level : 50-60 DB
- Oil Less : No
- Recommended operating Temp. : 33⁰- 160⁰ F
- Dimensions (inch) : 26.5 x 15.5 x 13
- Weight (lbs.) : 52
1500 PSI Standard (Oil Less) Misting Pumps
1500psi oil-less
0.15 GPM
-
Max Pressure (psi)¹ :
1500
-
Maximum number of nozzles: 20
-
Flow rate (gpm) : 0.15
- Filtration : 5 Micron
- Voltage : 110 V AC
- Full load Amps : 1.38
- RPM : 1600
- HP : 0.25
- Pump Inlet² : 3/8" or 1/4" pushlock
- Pump Outlet : 3/8" or 1/4" pushlock
- Solenoid : Yes
- Pressure switch/ No water cut-off : Yes
- Drive : Direct
- Thermal safety Switch³ : Yes
- By-pass : Yes
- Motor type : Enclosed
- Noise level : 60-70 DB
- Oil Less : Yes
- Recommended operating Temp. : 33⁰- 140⁰ F
- Dimensions (inch) : 15.5 x 14 x 10
-
Weight (lbs.) :
17
1500psi oil-less
0.3 GPM
-
Max Pressure (psi)¹ :
1500
-
Maximum number of nozzles :
40
-
Flow rate (gpm) :
0.3
- Filtration : 5 Micron
- Voltage : 110V AC
- Full load Amps : 2.15
- RPM : 1820
- HP : 0.25
- Pump Inlet² : 3/8" or 1/4" pushlock
- Pump Outlet : 3/8" or 1/4" pushlock
- Solenoid : Yes
- Pressure switch/ No water cut-off : Yes
- Drive : Direct
- Thermal safety Switch³ : Yes
- By-pass : Yes
- Motor type : Enclosed
- Noise level : 60-70 DB
- Oil Less : Yes
- Recommended operating Temp. : 33⁰- 140⁰ F
- Dimensions (inch) : 15.5 x 14 x 10
-
Weight (lbs.) :
17
| ¹ Max. Pressure is measured with one nozzle on the system. It depends on line length and numbers of nozzles | ² Every Mistcooling Inc. pumps comes with 3/4" GHT and filter kit, which can be attached at pump inlet. Contact supplier for special requirements. | ³ Thermal safety switch is set at 110⁰F and it may cycle off for cooling. |
Pump Manuals
Specialized Application Misting Pumps
VFD Misting Pumps
Variable Frequency Drive (VFD) Technology: Controls pump speed and frequency for precise water flow and pressure regulation.
Energy Efficiency: VFD pumps reduce energy consumption by adjusting motor speed to match demand.
Adjustable Flow Rates: Models available with different flow rates (1.0 GPM, 2.0 GPM, 3.0 GPM) for various applications.
Application Versatility: Suitable for cooling, humidification, and dust control.
Enhanced Durability: Reduced wear and tear on pump components due to variable speed operation.
Improved System Performance: Ensures optimal operation tailored to specific needs.
Comparison to Standard Misting Pumps: VFD pumps offer better energy efficiency, precise control, and reduced mechanical stress compared to standard misting pumps that operate at a fixed speed.
Brand: Offered by Mistcooling.com.
Discover more
High Flow Misting Pumps
- 1000 PSI high-pressure direct drive pump and pulley drive pump for
- outdoor cooling, dust suppression, humidification with accurate flow rates.
- Capable of supporting a large number of nozzles.
- The base pump is a Direct driven 3.0 GPM Pump.
Applications:
- Outdoor Cooling of large areas
- Condensor Pre-Cooling Mist Systems
- Agriculture / Poultry Cooling
- Dust Suppression
- Odor Control Misting System
- Humidification
Stainless Steel Misting Pumps
Stainless Steel Pump | Industrial Misting Pump
- Stainless Steel Misting Pump
- 1500 PSI
- For Industrial Misting applications
- Ideal for corrosive applications
Explosion Proof Misting Pump
- Our explosion-proof mist pumps are compatible with a variety of mist lines and mist fans.
- Robust, enclosed pump 110v/220v AC.
- Custom configurations are available for custom designed pumps and specifications, please contact our customer service t eam
Includes:
- Bypass Valve
- Outdoor Enclosure
- We can build up to 20 GPM pumps - please contact us for custom quote.
Explosion Proof Misting Pump
- Our explosion-proof mist pumps are compatible with a variety of mist lines and mist fans.
- Robust, enclosed pump 110v/220v AC.
- Custom configurations are available for custom designed pumps and specifications, please contact our customer service t eam
Includes:
- Bypass Valve
- Outdoor Enclosure
- We can build up to 20 GPM pumps - please contact us for custom quote.
Multi Zone Misting Pumps
The most common use of this pump is for creating independent residential misting zones including patios, pool areas, gazebos, and commercial installations like outdoor restaurants
Features:
- 1500 PSI output
- 1 Misting Zone
- Quiet misting pump operation
- Adjustable flow rate
- Filtration included
- Built-in solenoid
- Pressure bypass included
- Thermal safety switch included
- Pressure gauge
- Available with 1 - 4 Misting Zones
1500 PSI Misting Pump- 220 Volts
The most common use of this pump is for creating independent residential misting zones including patios, pool areas, gazebos, and commercial installations like outdoor restaurants
Features:
- Tri-Plex Piston Pumps
- Low Revolution Motor
- Continuous Smooth Mist
- Lower friction, heat, and noise levels
- The enlarged oil reservoir for ease of maintenance
- Long-lasting performance
- Inlet Pressure Switch
- Maximum Outlet Pressure: 1500PSI
- Maximum Inlet Pressure: 125PSI
- Minimum Inlet Pressure: (Based on setting on Pressure switch) or Flooded if the Pressure switch is bypassed
- Maximum Flow: 1LPM, 2LPM, 4LPM, 8LPM (Refer to manufacturing label on pump)
- 1 LPM Supports 20 Nozzles
- 2 LPM Supports 40 Nozzles
- 4 LPM Supports 80 Nozzles
- 8 LPM Supports 160 Nozzles
- Voltage: 220V AC
- Oil Type: Synthetic Motor Oil
- Oil Capacity: 11.8oz
- Maximum Fluid Temperature: For Room Temperature / Cold Water applications only
12 V DC Misting Pumps
The most common use of this pump is for creating independent residential misting zones including patios, pool areas, gazebos, and commercial installations like outdoor restaurants
Features:
- Tri-Plex Piston Pumps
- Low Revolution Motor
- Continuous Smooth Mist
- Lower friction, heat, and noise levels
- The enlarged oil reservoir for ease of maintenance
- Long-lasting performance
- Inlet Pressure Switch
- Maximum Outlet Pressure: 1500PSI
- Maximum Inlet Pressure: 125PSI
- Minimum Inlet Pressure: (Based on setting on Pressure switch) or Flooded if the Pressure switch is bypassed
- Maximum Flow: 1LPM, 2LPM, 4LPM, 8LPM (Refer to manufacturing label on pump)
- 1 LPM Supports 20 Nozzles
- 2 LPM Supports 40 Nozzles
- 4 LPM Supports 80 Nozzles
- 8 LPM Supports 160 Nozzles
- Voltage: 220V AC
- Oil Type: Synthetic Motor Oil
- Oil Capacity: 11.8oz
- Maximum Fluid Temperature: For Room Temperature / Cold Water applications only
Questions about Misting Pumps
A misting pump increases the water pressure in a misting system, ensuring a fine mist that evaporates quickly. This results in more efficient cooling without excessive water droplets, creating a comfortable environment even in hot and humid conditions.
Selecting the right misting pump depends on factors such as the size of the area to be cooled, the number of nozzles, and the desired pressure level. MistCooling offers a range of pumps suitable for different needs, from residential patios to large commercial spaces.
200 PSI: Ideal for smaller residential systems, providing adequate cooling with lower water usage. The mist produced is coarser and suitable for patio and backyard use.
1000 PSI: Suitable for medium-sized areas, offering a finer mist that evaporates faster, making it more effective in moderately large outdoor spaces and small commercial applications.
1500 PSI: Produces the finest mist, ideal for large commercial spaces and industrial applications. It ensures optimal cooling with rapid evaporation, making it the most effective for hot and humid environments. However, it can also be used in residential applications where the highest cooling efficiency and finest mist are desired, such as large patios, luxury outdoor spaces, or high-end residential projects.
Most misting pumps are compatible with standard misting systems, but it's essential to ensure that the pump's specifications match your system's requirements. Compatibility depends on the pump's pressure rating and the system's design.
Regular maintenance includes cleaning the pump filters, checking for any leaks, and ensuring that the nozzles are not clogged. It's also important to follow the manufacturer's guidelines for periodic servicing to extend the pump's lifespan and maintain optimal performance.
Yes, misting pumps are designed to be energy-efficient, providing effective cooling with minimal energy consumption. Advanced models often come with features that further enhance energy efficiency, such as variable speed motors and automatic shut-off mechanisms.
The noise level of misting pumps varies depending on the model. Many MistCooling pumps are designed to operate quietly, making them suitable for residential and commercial settings where noise levels are a concern.
Misting pumps are typically used for outdoor cooling applications. However, they can be used indoors in specific settings such as greenhouses or industrial facilities, where humidity control is necessary. Always ensure proper ventilation to prevent excessive moisture buildup indoors.
Many misting pumps come with detailed installation instructions, allowing for DIY installation. However, if you're not comfortable with installation or have a complex system, it's advisable to hire a professional to ensure proper setup and operation.
Misting pumps typically run on standard electrical power. Some models may be available with options for solar or battery power, offering flexibility for different setups and locations.
12V DC Misting Pump - 1000 PSI FAQ's
The 12V DC Misting Pump - 1000 PSI is specifically designed for mobile misting cooling applications, including golf-cart misters, RV misters, lawnmower misters, boat misting systems, or any vehicle running on 12V DC power. It can also be used in portable oven cooling misters.
This pump can support up to 20 nozzles, making it suitable for large misting systems.
The pump has a flow rate of 0.15 gallons per minute (GPM) and consumes 2.26 amps, operating on a 12V DC power supply.
The dimensions of the pump are 9" x 7.5" x 4", and it weighs 9 pounds.
Yes, the pump features whisper-quiet operation, making it ideal for environments where noise is a concern.
Yes, the 12V DC Misting Pump - 1000 PSI is made in the USA, ensuring high-quality manufacturing standards.
The pump comes with a warranty, and customers can contact the company for specific details regarding the warranty period and coverage. Mistcooling Warranty.
200 PSI - 12 V DC Misting Pump FAQ's
The 200 PSI - 12V DC Misting Pump is ideal for mid-pressure misting applications. It is suitable for residential use, such as cooling patios, decks, and other outdoor spaces.
Key features of the 200 PSI pump include quiet operation, self-priming from a tank, built-in thermal safety, support for up to 20 nozzles, and easy wall mounting. It also operates on 12V DC power and is easy to hook up with any garden hose.
Yes, the 200 PSI - 12V DC Misting Pump is made in the USA, ensuring high-quality and reliable performance.
This pump can support up to 20 nozzles, which allows for effective cooling over a large area.
Yes, the pump features whisper-quiet operation, making it suitable for residential areas where noise reduction is important.
The pump comes with a warranty. Customers should contact the company for detailed information regarding the warranty terms and coverage.Mistcooling Warranty.
The 200 PSI pump is designed to be wall mountable, providing flexibility in installation locations.